THERMOSTATIC BATHS, BT SERIES

It is often interesting to check the degree of resistance of materials to liquids such as water, oil or other substances, tempering at a certain temperature according to the type of test. Such tests are usually performed in the thermostatic baths.

Features:
 
Immersion bath with water circulation
·        Volumes: From 27 liters to 5.000 liters
·        Temperature range: From room to +50 ºC.
  From room to +65 ºC.
  From room to +85 ºC.
  From room to +90 ºC (boiling).
  From +5 ºC to +50 ºC.
  From +5 ºC to +80 ºC.
 
Immersion bath with glycol water or glycol
·        Volumes: From 27 liters to 5.000 liters
·        Temperature range: From room to +110 ºC.
  From 0 ºC to +110 ºC.
  From -20 ºC to 110 ºC.
 
Immersion bath with 2, 4, 6 OR 8 compartments
·        Volumes: Under demand
  Independent Feed circuit for each compartment.

Standard:

– Exterior: Lacquered sheet steel.

– Interior: Stainless steel AISI 304.

– Flat gate, for baths of +50ºC.

– For baths of more than 60 ºC, gate with angle, with chimney for steam extraction

– Four casters or adjustable legs (depending of models)

– Heating system by means of immersion armored heating resistances, protected by a grid. Heating power electronic control by statics relay (triacs)

– Circulation pump.

– Water inlet electronic level

– Closed water circuit / anticorrosive glycol

– Drainage key.

– Cooling system: cooling coil and independent cooling group installed outside.

– Temperature control with automatic adjustment and precise control system of the PID parameters.

– Probe: PT-100 Ohm, DIN Class A.

Optional:

– Programmer with communication port RS-232 and remote control software.

– I/O digital or analog for events.

– Liquid pressure manometers

– Analog flow meter.